[RE-wrenches] SI6048s won't charge from generator

[Jerry Shafer]

Spell check is thew worst.
On May 4, 2014 7:41 PM, "Jerry Shafer" <jerrysgarage01 at gmail.com> wrote:

> Charger set to on bit the max amps to 0 or volt setting to high. Isis you
> use the inverter to turn on the genny or did you just start it up because
> it may not connect if it did not request it that has happened to my
> customers. Go into the gen menu and try from there.
> On May 4, 2014 7:25 PM, "William Miller" <william at millersolar.com> wrote:
>
>> Jerry:
>>
>> Your answer was pretty vague. What kind of mid-wire or programming error?
>>
>> William
>>
>> Miller Solar
>>
>> On May 4, 2014, at 7:08 PM, Jerry Shafer <jerrysgarage01 at gmail.com>
>> wrote:
>>
>> Sorry, Programming or mis wire is where i would put my money.
>> On May 3, 2014 1:07 PM, <william at millersolar.com> wrote:
>>
>>> Friends:
>>>
>>>
>>>
>>> We commissioned a new SI6048 3 phase system yesterday.  It will create
>>> power but it won’t charge from the generator.  This is a generator that was
>>> working with a 3 SI4548 system.  We checked rotation and volts and hertz.
>>> We checked inverter programming.  All seems correct.  There is no phone
>>> service so using tech support is cumbersome.
>>>
>>>
>>>
>>> Has anyone experienced this problem before?
>>>
>>>
>>>
>>> Thanks!
>>>
>>>
>>>
>>> William
>>>
>>>
>>>
>>>
>>>
>>> <image003.jpg>
>>> Lic 773985
>>> millersolar.com <http://www.millersolar.com/>
>>> 805-438-5600
>>>
>>>
>>>
>>> _______________________________________________
>>> List sponsored by Home Power magazine
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Change email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out participant bios:
>>> www.members.re-wrenches.org
>>>
>>>
>>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140504/5173f47c/attachment-0004.html>