[RE-wrenches] SI6048s won't charge from generator

[Jerry Shafer]

Charger set to on bit the max amps to 0 or volt setting to high. Isis you
use the inverter to turn on the genny or did you just start it up because
it may not connect if it did not request it that has happened to my
customers. Go into the gen menu and try from there.
On May 4, 2014 7:25 PM, "William Miller" <william at millersolar.com> wrote:

> Jerry:
>
> Your answer was pretty vague. What kind of mid-wire or programming error?
>
> William
>
> Miller Solar
>
> On May 4, 2014, at 7:08 PM, Jerry Shafer <jerrysgarage01 at gmail.com> wrote:
>
> Sorry, Programming or mis wire is where i would put my money.
> On May 3, 2014 1:07 PM, <william at millersolar.com> wrote:
>
>> Friends:
>>
>>
>>
>> We commissioned a new SI6048 3 phase system yesterday.  It will create
>> power but it won’t charge from the generator.  This is a generator that was
>> working with a 3 SI4548 system.  We checked rotation and volts and hertz.
>> We checked inverter programming.  All seems correct.  There is no phone
>> service so using tech support is cumbersome.
>>
>>
>>
>> Has anyone experienced this problem before?
>>
>>
>>
>> Thanks!
>>
>>
>>
>> William
>>
>>
>>
>>
>>
>> <image003.jpg>
>> Lic 773985
>> millersolar.com <http://www.millersolar.com/>
>> 805-438-5600
>>
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140504/b661e88e/attachment-0003.html>