[RE-wrenches] alternatives to Outback GSLC xxxx box?

[Kirpal]

Kirk.  Good morning.  The 175A breaker assembly is included in the bare
GSLC box for the radians.  You have to order the 175A breakers separately;
they are not included.  The bare box includes a 500A 50MV shunt, the
breaker brackets to connect breakers to the inverter and that's it.  No AC
buss bars are included.  Negative and ground buss bars are included.
In a multi inverter system if 1000A 100mv shunt size is needed, note that
you can not mix 500A and 1000A shunts on a single flexnet DC.  It doesn't
work.  Shunts all have to be the same.  I found this out the hard way.

Sunny Regards,
Kirpal Khalsa
Oregon LRT#25
Oregon Solarworks LLC
www.oregonsolarworks.com
541-299-0402


On Tue, Mar 1, 2022 at 6:23 AM Kirk Herander <kirkh at vermont.solar> wrote:

> All,
>
> I am doing a multiple stacked Radian GS8048 system. And all I need in my
> design is two OB 175 a breakers in a box which integrates w/ each
> respective inverter. The manual bypass switch is useless, for all inverters
> need to be bypassed at once using a single external bypass. OB does not
> make a version of the GSLC which only has the inverter breakers. They do
> make an empty GSLC with nothing in it. But no mounting assembly for the
> breakers, and no add-on kit offering to do this either.
> I thought Midnite made something compatible, but don't see it on their web
> site. Any ideas? Thanks.
>
> --
>
> *Kirk Herander / **kirkh at vermont.solar <kirkh at vermont.solar>*
>
> *Owner|Principal, VT Solar, LLC*
>
> *Celebrating our 31st Anniversary 1991-2022!!*
>
> *www.vermont.solar*
> <https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0>
>
> dba Vermont Solar Engineering
>
> 802.863.1202
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20220301/4fde8e68/attachment.htm>