[RE-wrenches] Enphase Enpower Smart Switch as service disconnect

[Jason Szumlanski]

Does anyone know if you can use the Smart Switch as a simple service
disconnect if not installing solar and batteries now and have it work out
of the box without any commissioning?

I have a client building a new house and they are going to add solar and
batteries after the certificate of occupancy is issued. I want to get the
Smart switch installed as a service disconnect so I don't have to pull the
meter later. I assume I can trust use the load side lugs to feed the main
distribution panel in the home.

Jason Szumlanski
Florida Solar Design Group
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210910/57dde0db/attachment.htm>