[RE-wrenches] Enphase Enpower Smart Switch as service disconnect

[Rebekah Hren]

I don't see why not, I have one I'm experimenting with in my garage now and
it passes power through the bus prior to commissioning. I would make sure
to add the Eaton BR main breaker in the Enpower at whatever amperage
required for a more trustworthy discontent than the relay manual switch. It
doesn't come with any breakers.

You could also commission it as a single device, perhaps? The app lets you
add devices later.
Let us know if you try it!
Rebekah

On Fri, Sep 10, 2021, 7:57 AM Jason Szumlanski <
jason at floridasolardesigngroup.com> wrote:

> Does anyone know if you can use the Smart Switch as a simple service
> disconnect if not installing solar and batteries now and have it work out
> of the box without any commissioning?
>
> I have a client building a new house and they are going to add solar and
> batteries after the certificate of occupancy is issued. I want to get the
> Smart switch installed as a service disconnect so I don't have to pull the
> meter later. I assume I can trust use the load side lugs to feed the main
> distribution panel in the home.
>
> Jason Szumlanski
> Florida Solar Design Group
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20210910/20a1c2cb/attachment.htm>