[RE-wrenches] Outback AC Backfeed Error

[Chris Worcester]

Hi Jon,I have seen this early on, when the Mate3 first came out. The slave back fed the master. The Mate3 didn't accept our programming, a firmware update corrected this glitch. Chris Worcester chris at solarwindworks.com530-448-9692Sent from my Samsung Galaxy s9.
-------- Original message --------From: Jon Siegenthaler <jon.siegenthaler at gmail.com> Date: 12/11/20  6:01 PM  (GMT-08:00) To: re-wrenches at lists.re-wrenches.org Subject: [RE-wrenches] Outback AC Backfeed Error Hey wrenches,I have a client who has a couple of the Radian 8048's and has an error code of "AC Backfeed Error GS-1". Looking at the manual it states that "Usually indicates another AC power source (out of phase with the inverter) was connected to the unit’s AC output. Can also occur if an out-of-phase AC source is connected to the inverter’s AC input."However when this happened the generator wasn't running and it's an off grid system. Is there a way that the master is looking to the slave as another power source? The system had been running fine this week, auto running the generator early morning and shutting down on its own. Anyone seen something like this before? Thanks,Jon Siegenthaler
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201211/d8e3de7e/attachment.htm>