[RE-wrenches] Outback AC Backfeed Error

Foxfire Energy dan at foxfire-energy.com
Fri Dec 11 21:23:53 EST 2020


Seem to recall something similar with early FX inverters.. Don’t recall the particulars but it might have had something to do with loosing their mind before shutting down.. maybe a shorted output.

Sent from my iPhone

On Dec 11, 2020, at 9:16 PM, William Miller <william at millersolar.com> wrote:


Jon:

In the deep recess of my memory I recall this error code with FX inverters.  It was caused by a stuck transfer relay.  You might open the inverter cover and look for signs of smoke or arcing in the relay.

Good luck!

Miller Solar
17395 Oak Road, Atascadero, CA 93422
805-438-5600
www.millersolar.com<http://www.millersolar.com/>
CA Lic. 773985


From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org<mailto:re-wrenches-bounces at lists.re-wrenches.org>] On Behalf Of Jon Siegenthaler
Sent: Friday, December 11, 2020 6:01 PM
To: re-wrenches at lists.re-wrenches.org<mailto:re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Outback AC Backfeed Error

Hey wrenches,

I have a client who has a couple of the Radian 8048's and has an error code of "AC Backfeed Error GS-1". Looking at the manual it states that "Usually indicates another AC power source (out of phase with the inverter) was connected to the unit’s AC output. Can also occur if an out-of-phase AC source is connected to the inverter’s AC input."

However when this happened the generator wasn't running and it's an off grid system. Is there a way that the master is looking to the slave as another power source? The system had been running fine this week, auto running the generator early morning and shutting down on its own.

Anyone seen something like this before? Thanks,

Jon Siegenthaler
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20201212/8ca9a905/attachment.htm>


More information about the RE-Wrenches mailing list