[RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

[Jay]

Hi Jason,  

Have you rebooted it?

I’ve found that usually unplugging and replugging and possibly turning the CC on/off works. 

Jay
Peltz Power

> On Apr 16, 2020, at 1:03 PM, Jason Szumlanski <jason at floridasolardesigngroup.com> wrote:
> 
> 
> I am working with a client (not my install) with a XW6048 and MPPT 80 600 with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to access the system settings and XW configuration, but not the MPPT settings. It is connected via Xanbus in this manner:
> 
> SCP -> MPPT -> XW
> 
> So the MPPT is in the middle and is passing through the XW signal just fine.
> 
> The MPPT also has a red error light illuminated, but it is charging the battery (positive current measured via clamp meter).
> 
> Any ideas?
> 
> Thanks,
> 
> Jason Szumlanski
> 
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200416/acec0ed7/attachment.htm>