[RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

[Jason Szumlanski]

I am working with a client (not my install) with a XW6048 and MPPT 80 600
with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to
access the system settings and XW configuration, but not the MPPT settings.
It is connected via Xanbus in this manner:

SCP -> MPPT -> XW

So the MPPT is in the middle and is passing through the XW signal just fine.

The MPPT also has a red error light illuminated, but it is charging the
battery (positive current measured via clamp meter).

Any ideas?

Thanks,

Jason Szumlanski
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20200416/09ed1d7a/attachment.htm>