[RE-wrenches] Backfeed in PG&E territory

[frenergy]

Wrenches,

             Is the only a way to back feed 128 amps (240v, split PH) 
onto a 200 amp panel is to tap the conductors between the meter and the 
main CB, assuming I can pull it off in the "customer section" of the 
panel.  Of course with the requisite AC disco within 10 feet.  Or, has 
anybody ever gotten a written approval from a panel manu to thread a 
1/4" hole in a bus between the meter and the main CB to install a lug 
for accepting a backfeed source?

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus