[RE-wrenches] Residential tracker that has horizontal axis in east-west orientation?

Christopher Warfel cwarfel at entech-engineering.com
Tue Aug 27 13:16:04 EDT 2019


Yes, that would be the ticket.

On 8/27/2019 10:24 AM, Dave Angelini Offgrid Solar wrote:
> Hmm Chris,
>
> How far south? Like the equator?
>
> Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/
> e-mail offgridsolar at sti.net
> text 209 813 0060
>
> On Tue, 27 Aug 2019 07:35:53 -0400, Christopher Warfel
> <cwarfel at entech-engineering.com> wrote:
>> Hi Dave, I am looking for a tracker that the horizontal "tube" runs east
>> west, so that the modules, when placed in portrait mode, are facing
>> south and will adjust their tilt angle based upon mostly by the season.
>> They have it so the horizontal tube runs north south and the module
>> rotate east west following the daily sun. The cannot be adjusted to
>> account for latitude . At noon, no matter what season they will be flat.
>> It's no good as you get further north.  Hope this makes more sense.
> Chris
>> On 8/26/2019 11:01 AM, Dave Angelini Offgrid Solar wrote:
>>> Chris,
>>>
>>> Can you restate this, I do not understand. I use alot of these and have
>>> quite a bit of experience with Wattsun, formerly Array tech, formerly
>>> Wattsun. I am also looking for a single axis that is on a 6 inch pole.
>>> Wattsun only makes the 8 inch that needs a back-hoe for lifting. Too
>>> heavy
>>> for most offgrid.
>>>
>>> Dave Angelini Offgrid Solar
>>> "we go where powerlines don't"
>>> http://members.sti.net/offgridsolar/
>>> e-mail offgridsolar at sti.net
>>> text 209 813 0060
>>>
>>> On Mon, 26 Aug 2019 09:33:01 -0400, Christopher Warfel
>>> <cwarfel at entech-engineering.com> wrote:
>>>> Not too long ago there were postings about residential trackers. I put
>>>> in a plug for Array Tech, but we are having a very hard time with
>>>> getting information on the controller and how to get it to work for
> our
>>>> case. I have moved the sensor every which way but pointing down.......
>>>> Their controller comes from the commercial/utility side of the company
>>>> and is designed to place as many modules on a foot print and eliminate
>>>> shading which isn't an issue if you are putting in one single tracker.
>>>> The horizontal axis is north south, and the modules move east west.
> The
>>>> array is a  zero tilt which is non optimal for most of the year.  Does
>>>> anyone know of a single axis tracker that is designed for east west
>>>> horizontal axis so the modules can adjust throughout the day and
> seasons
>>>> with the modules facing south?  Thank you, Chris Warfel
>>>>
>>>> _______________________________________________
>>>> List sponsored by Redwood Alliance
>>>>
>>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>>
>>>> Change listserver email address & settings:
>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>>
>>>> List-Archive:
>>>>
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>>> List rules & etiquette:
>>>> www.re-wrenches.org/etiquette.htm
>>>>
>>>> Check out or update participant bios:
>>>> www.members.re-wrenches.org
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>>
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org


More information about the RE-Wrenches mailing list