[RE-wrenches] Bus bar battery jumpers

[Glenn Burt]

I have always bought the appropriately sized for the anticipated current,
copper bar stock from McMaster Carr and cut, drilled and applied heat shrink
myself.

 

-Glenn

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of
Drake
Sent: Tuesday, April 30, 2019 12:27 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Bus bar battery jumpers

 

Hello Wrenches,

I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2
terminals which will be about 2 1/2 inches away from the terminals they will
be wired to. Standard battery jumpers would be ridiculous in this situation.
Busbars would be clean and efficient. Concorde doesn't have a solution.

Does anyone know of a source for busbars?

Thank you,

Drake 

Drake Chamberlin
Athens Electric LLC
OH License 44810
CO License 3773
NABCEP Certified Solar PV 
740-448-7328
http://athens-electric.com/ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/81fcb0d1/attachment.htm>