[RE-wrenches] Bus bar battery jumpers
drake.chamberlin at redwoodalliance.org
drake.chamberlin at redwoodalliance.org
Tue Apr 30 20:35:36 EDT 2019
The same method would apply, and looks viable.
Thanks,
Drake
----- Original Message -----
From:
"RE-wrenches" <re-wrenches at lists.re-wrenches.org>
To:
"RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Cc:
Sent:
Tue, 30 Apr 2019 12:57:56 -0700
Subject:
Re: [RE-wrenches] Bus bar battery jumpers
Sorry Drake, I should read better…you said Concorde.
Larry
On Apr 30, 2019, at 12:42 PM, Starlight Solar Power Systems
<larry at starlightsolar.com [1]> wrote:
Hi Drake,
The way I wire them is to place them side by side and flip every other
battery 180°. Then you can use a interconnect cable without tight
bends. I attached a diagram as it is easier to see than to describe.
Larry Crutcher
Starlight Solar Power Systems
<untitled.pdf>
On Apr 30, 2019, at 9:26 AM, Drake
<drake.chamberlin at redwoodalliance.org [2]> wrote:
Hello Wrenches,
I am wiring a set of 2 V Concorde batteries for 48 V. Each battery
has 2 terminals which will be about 2 1/2 inches away from the
terminals they will be wired to. Standard battery jumpers would be
ridiculous in this situation. Busbars would be clean and efficient.
Concorde doesn't have a solution.
Does anyone know of a source for busbars?
Thank you,
Drake
Drake Chamberlin
Athens Electric LLC
OH License 44810
CO License 3773
NABCEP Certified Solar PV
740-448-7328
http://athens-electric.com/ [3]
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches at lists.re-wrenches.org [4]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[5]
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
Links:
------
[1] mailto:larry at starlightsolar.com
[2] mailto:drake.chamberlin at redwoodalliance.org
[3] http://athens-electric.com/
[4] mailto:RE-wrenches at lists.re-wrenches.org
[5]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/404931a9/attachment.htm>
More information about the RE-Wrenches
mailing list