[RE-wrenches] Bus bar battery jumpers

[drake.chamberlin at redwoodalliance.org]

That is exactly the setup. 

Thanks,

Drake 

----- Original Message -----
From:
 "RE-wrenches" <re-wrenches at lists.re-wrenches.org>

To:
"RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Cc:

Sent:
Tue, 30 Apr 2019 13:16:28 -0700
Subject:
Re: [RE-wrenches] Bus bar battery jumpers

 Well, perhaps I was on track anyway….you can use the same method
(flip every other battery) if you are using a battery with 2 terminals
per pole (like Lifeline).
Larry Crutcher

Starlight Solar Power Systems

On Apr 30, 2019, at 12:57 PM, Starlight Solar Power Systems
<larry at starlightsolar.com [1]> wrote:

Sorry Drake, I should read better…you said Concorde.
 Larry

On Apr 30, 2019, at 12:42 PM, Starlight Solar Power Systems
<larry at starlightsolar.com [2]> wrote:

Hi Drake,

The way I wire them is to place them side by side and flip every other
battery 180°. Then you can use a interconnect cable without tight
bends. I attached a diagram as it is easier to see than to describe.

Larry Crutcher

Starlight Solar Power Systems

<untitled.pdf>

On Apr 30, 2019, at 9:26 AM, Drake
<drake.chamberlin at redwoodalliance.org [3]> wrote:

  Hello Wrenches,

 I am wiring a set of 2 V Concorde batteries for 48 V. Each battery
has 2 terminals which will be about 2 1/2 inches away from the
terminals they will be wired to. Standard battery jumpers would be
ridiculous in this situation. Busbars would be clean and efficient.
Concorde doesn't have a solution.

 Does anyone know of a source for busbars?

 Thank you,

 Drake 

Drake Chamberlin
Athens Electric LLC
 OH License 44810
 CO License 3773
 NABCEP Certified Solar PV 
 740-448-7328
http://athens-electric.com/ [4] 



Links:
------
[1] mailto:larry at starlightsolar.com
[2] mailto:larry at starlightsolar.com
[3] mailto:drake.chamberlin at redwoodalliance.org
[4] http://athens-electric.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/af996fe1/attachment.htm>