[RE-wrenches] Bus bar battery jumpers

[jay]

HI Drake,

I’ve used

 https://stormpowercomponents.com <https://stormpowercomponents.com/>

jay 
peltz power

> On Apr 30, 2019, at 10:26 AM, Drake <drake.chamberlin at redwoodalliance.org> wrote:
> 
> Hello Wrenches,
> 
> I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2 terminals which will be about 2 1/2 inches away from the terminals they will be wired to. Standard battery jumpers would be ridiculous in this situation. Busbars would be clean and efficient. Concorde doesn't have a solution.
> 
> Does anyone know of a source for busbars?
> 
> Thank you,
> 
> Drake 
> 
>  <>Drake Chamberlin
> Athens Electric LLC
> OH License 44810
> CO License 3773
> NABCEP Certified Solar PV 
> 740-448-7328
> http://athens-electric.com/ <http://athens-electric.com/> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/30e08812/attachment.htm>