[RE-wrenches] Bus bar battery jumpers

[Starlight Solar Power Systems]

Hi Drake,

The way I wire them is to place them side by side and flip every other battery 180°. Then you can use a interconnect cable without tight bends. I attached a diagram as it is easier to see than to describe.

Larry Crutcher
Starlight Solar Power Systems





On Apr 30, 2019, at 9:26 AM, Drake <drake.chamberlin at redwoodalliance.org> wrote:

Hello Wrenches,

I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2 terminals which will be about 2 1/2 inches away from the terminals they will be wired to. Standard battery jumpers would be ridiculous in this situation. Busbars would be clean and efficient. Concorde doesn't have a solution.

Does anyone know of a source for busbars?

Thank you,

Drake 

 <>Drake Chamberlin
Athens Electric LLC
OH License 44810
CO License 3773
NABCEP Certified Solar PV 
740-448-7328
http://athens-electric.com/ <http://athens-electric.com/> 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/333dfb08/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: untitled.pdf
Type: application/pdf
Size: 67536 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/333dfb08/attachment.pdf>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/333dfb08/attachment-0001.htm>