[RE-wrenches] Bus bar battery jumpers

[Maverick Brown]

I make custom bus bars for Concorde and Fullriver. Which battery are you installing, 12150 or 9150?

Contact me directly and I’ll see if have what you need in stock. 

Thank you,

Maverick


> On Apr 30, 2019, at 11:26 AM, Drake <drake.chamberlin at redwoodalliance.org> wrote:
> 
> Hello Wrenches,
> 
> I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2 terminals which will be about 2 1/2 inches away from the terminals they will be wired to. Standard battery jumpers would be ridiculous in this situation. Busbars would be clean and efficient. Concorde doesn't have a solution.
> 
> Does anyone know of a source for busbars?
> 
> Thank you,
> 
> Drake 
> 
> Drake Chamberlin
> Athens Electric LLC
> OH License 44810
> CO License 3773
> NABCEP Certified Solar PV 
> 740-448-7328
> http://athens-electric.com/ 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/37814434/attachment.htm>