[RE-wrenches] Outback Boards

[Lones Tuss]

Hello Drake
Yes replacing a single board in an FX is possible. In the case of a lightning strike it may be advisable to replace all three boards as damage may not be visible.
Take Care Sir

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of drake.chamberlin at redwoodalliance.org
Sent: Tuesday, February 5, 2019 2:52 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Outback Boards

** [EXTERNAL EMAIL] - Please report any suspicious attachments, links, or requests for sensitive information to the Help Desk. **
________________________________
Hello Wrenches,

It is my understanding that old Outback VFX inverters can not have only one board replaced, but need to have three changed.

We have an inverter that is from around 2005 (serial number VFX 008968). Can one board be replaced on this unit?

Thanks,

Drake

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190206/25c50cfb/attachment.htm>