[RE-wrenches] Outback Boards

[cwarfel at entech-engineering.com]

We have replaced one board on two different inverters in the past 10
years. Chris

On 2019-02-05 17:52, drake.chamberlin at redwoodalliance.org wrote:

> Hello Wrenches, 
> 
> It is my understanding that old Outback VFX inverters can not have only one board replaced, but need to have three changed. 
> 
> We have an inverter that is from around 2005 (serial number VFX 008968). Can one board be replaced on this unit? 
> 
> Thanks, 
> 
> Drake 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm [1]
> 
> Check out or update participant bios:
> www.members.re-wrenches.org [2]
 

Links:
------
[1] http://www.re-wrenches.org/etiquette.htm
[2] http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190205/a4529758/attachment.htm>