[RE-wrenches] Outback Boards

[John Blittersdorf]

I have often replaced single boards. Usually the control board but sometimes the AC board or both.  If I remember right, the AC board is common on all, the control board is different by DC voltage and whether grid tie or off grid and the FET board is DC voltage specific. Not including European and mobile units.  This is why I have stayed with Outback.  Field repairable.  About an hour to take it off the wall, open it up, switch boards, close it up and reattach to the FlexWare or e-panel.  I’ve done dozens over the years. 

John Blittersdorf



Sent from my iPhone

> On Feb 6, 2019, at 10:55 AM, Lones Tuss <ltuss at outbackpower.com> wrote:
> 
> Hello Drake
> Yes replacing a single board in an FX is possible. In the case of a lightning strike it may be advisable to replace all three boards as damage may not be visible.
> Take Care Sir
>  
> From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of drake.chamberlin at redwoodalliance.org
> Sent: Tuesday, February 5, 2019 2:52 PM
> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
> Subject: [RE-wrenches] Outback Boards
>  
> ** [EXTERNAL EMAIL] - Please report any suspicious attachments, links, or requests for sensitive information to the Help Desk. **
> Hello Wrenches,
>  
> It is my understanding that old Outback VFX inverters can not have only one board replaced, but need to have three changed.
>  
> We have an inverter that is from around 2005 (serial number VFX 008968). Can one board be replaced on this unit?
>  
> Thanks,
>  
> Drake
>  
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190206/0bc88ec0/attachment.htm>