[RE-wrenches] LiFePo4 vs BOS

Dave Angelini Offgrid Solar offgridsolar at sti.net
Tue Jan 8 13:02:31 EST 2019



We did the LG RESU 48v field testing here for Schneider. Never had any
problems with this and both of their cc's. Still running fine 2 years
later. 

What I found was in the effort to get to 100% Soc there would be
micro cycles of the battery. By staying below 100% there was not any more
issue with this. I keep the charge voltage just slightly lower by a few
tenths of a volt and get a 97% Soc. Looks just like my old LA bank on a
voltage graph. Never had any problems with lights out on this system, NEVER
! 

I do once every 3 months or so raise the voltage to 100% Soc to let the
BMS balance if it wants to. I sure wish LG would sell the 13.5 KWH in North
America. So Sad! 
Dave Angelini Offgrid Solar
"we go where powerlines
don't"
http://members.sti.net/offgridsolar/ [1]
e-mail offgridsolar at sti.net
[2]
text 209 813 0060

On Tue, 8 Jan 2019 11:40:09 -0600, Darryl Thayer 
wrote:  Hello Larry is always a good source. I have used Morningstar MPPT
60 s on my few LiFe po4 systems 4 years now, no controller problems or
equipment problems yet. I imagine when the BMS disconnects battery voltage
high, controller output goes high for a short period i will put an Egauge
on the output to messure voltage on one system to see if i catch an event.
Very good point 
  On Tue, Jan 8, 2019, 11:03 AM Starlight Solar Power
Systems 

Links:
------
[1] http://members.sti.net/offgridsolar/
[2]
mailto:offgridsolar at sti.net
[3] mailto:larry at starlightsolar.com
[4]
mailto:Dan at foxfire-energy.com
[5] http://www.foxfire-energy.com/
[6]
mailto:RE-wrenches at lists.re-wrenches.org
[7]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[8]
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[9]
http://www.re-wrenches.org/etiquette.htm
[10]
http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190108/cffd0614/attachment.htm>


More information about the RE-Wrenches mailing list