<p>We did the LG RESU 48v field testing here for Schneider. Never had any problems with this and both of their cc's. Still running fine 2 years later.</p>
<p>What I found was in the effort to get to 100% Soc there would be micro cycles of the battery. By staying below 100% there was not any more issue with this. I keep the charge voltage just slightly lower by a few tenths of a volt and get a 97% Soc. Looks just like my old LA bank on a voltage graph. Never had any problems with lights out on this system, NEVER !</p>
<p>I do once every 3 months or so raise the voltage to 100% Soc to let the BMS balance if it wants to. I sure wish LG would sell the 13.5 KWH in North America. So Sad!</p>
<pre><strong><span>Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" target="_blank">http://members.sti.net/offgridsolar/</a>
e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
<p>On Tue, 8 Jan 2019 11:40:09 -0600, Darryl Thayer <darylsolar1@gmail.com> wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px; width:100%"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<div dir="auto">Hello Larry is always a good source. I have used Morningstar MPPT 60 s on my few LiFe po4 systems 4 years now, no controller problems or equipment problems yet. I imagine when the BMS disconnects battery voltage high, controller output goes high for a short period i will put an Egauge on the output to messure voltage on one system to see if i catch an event. Very good point</div>
<br />
<div class="gmail_quote">
<div dir="ltr">On Tue, Jan 8, 2019, 11:03 AM Starlight Solar Power Systems <<a href="mailto:larry@starlightsolar.com">larry@starlightsolar.com</a> wrote:</div>
<blockquote class="gmail_quote" style="margin: 0 0 0 .8ex; border-left: 1px #ccc solid; padding-left: 1ex;">
<div style="word-wrap: break-word;">There was some off board chatter about this subject but I think it is useful to some to copy my comments on the board.
<div> </div>
<div>If a Li battery EMS or BMS detects a fault condition, it can cause an open circuit to the battery. As the battery owner gets familiar with their new energy storage system, this will likely happen. If high current is flowing, connected devices need to be able to handle that condition without harm.
<div> </div>
<div>Morningstar notified us (about 4 year ago) that this event could cause damage to their controller. That's puzzling to me because OCV also happens if your battery circuit protection opens.
<div> </div>
<div>We mostly sell Midnite and Blue Sky Energy controllers with some Outback in the mix. No failures have been reported to us. </div>
<div>
<div><span> </span></div>
<div><span>Larry Crutcher</span>
<div>
<div style="font-variant-ligatures: normal; font-variant-numeric: normal; font-variant-alternates: normal; font-variant-east-asian: normal; line-height: normal; word-wrap: break-word;">
<div style="word-wrap: break-word;">
<div style="word-wrap: break-word;"><span>Starlight Solar Power Systems</span></div>
</div>
</div>
</div>
</div>
</div>
</div>
<div>
<div style="color: #000000; font-family: Helvetica; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; word-wrap: break-word;">
<div style="color: #000000; letter-spacing: normal; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; word-wrap: break-word;"> </div>
</div>
<br class="m_944007011377505324Apple-interchange-newline" style="color: #000000; font-family: Helvetica; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px;" /><br class="m_944007011377505324Apple-interchange-newline" /></div>
<br />
<div>
<div>On Jan 7, 2019, at 7:46 AM, <a href="mailto:Dan@foxfire-energy.com">Dan@FoxFire-Energy.com</a> wrote:</div>
<br class="m_944007011377505324Apple-interchange-newline" />
<div>
<div>
<div>I've been asked to trouble shoot a problem with a new set of LiFePO4 batteries on an older OB system.. The customer complained the system would go dark within a few min. of the batt indicator light going yellow.. From what I've gathered so far the BMS of the batteries is shutting down.. The distributor sent out one of their techs, but it looks like they missed a few adjustments.. The biggie is their CC (OB FM60) went into snooze mode within a day of being connected to these guys, and now OB tells me the CC lost it's FETs and that's pretty common with NiFePO4 BMS.. also when the tech came out to commission the bank, one of the terminals on a battery melted and another distorted.. the customer has a few more days to accept the bank, I'm thinking send them back.. Comments?</div>
<div> </div>
<div><br />Dan Brown<br />Foxfire Energy Corp.<br />Renewable Energy Systems<br />(802)-483-2564<br /><a href="http://www.foxfire-energy.com/">www.Foxfire-Energy.com</a></div>
</div>
______________________________________________</div>
</div>
</div>
</div>
_______________________________________________<br /> List sponsored by Redwood Alliance<br /> <br /> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /> <br /> Change listserver email address & settings:<br /> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /> <br /> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br /> <br /> List rules & etiquette:<br /> <a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br /> <br /> Check out or update participant bios:<br /> <a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a><br /> </blockquote>
</div>
</blockquote>
<div>-- <br />
<pre> </pre>
<pre> </pre>
</div>