SW inverter and generator cycling in and out [RE-wrenches]

[R. Sparks Scott]

>Inaccuracy of Trace metering? I guess so.

	Jack;

	As I've said before the Trace AC metering bites big time. I installed a
dedicated current sense loop connected to a calibrated analog meter so I
can see what the real current is. It's particularly bad at lower amps.
where the percentage of error is much more noticable. Example, Trace says 4
amps, amp-clamp, dedicated analog meter and Fluke set to AC amps in-circuit
all say 6 amps. Don't trust the on-board display, I say!!!

	-S

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics