Sunfrost noise/Propane Fridge [RE-wrenches]

Jonathan Hill solarjon at netshel.net
Thu Sep 28 13:09:03 EDT 2000


<x-flowed>>     While I will cede the beauty of using a diverting controller to dump
>excess power to cooling food, my personal experience with a Sibir propane
>fridge in our home would lead me to buy electric next time around.
>     In NM, propane fridges (even in lousy shape) fetch top dollar prices.
>In our house, the roar of the burner is often the loudest noise.  The burner
>goes out at random times.  The burner does not produce enough heat to make a
>draft IF properly vented (making them susceptible to backdraft), and I have
>yet to see one in any home vented at all.  The gaskets on my fridge, of
>unknown vintage, have all the sealing power of, well, nothing.
>     Since I have started working in solar, I dread the calls that begin
>every heat wave--when a fridge dies, its always a crisis.  I have been told
>that it is impossible to get parts for my Sibir.  Great, another disposable
>appliance!
>     When coupled to a further dependence upon dead dinosaurs, in hindsight I
>shoulda bought a SunFrost!
>
>---- Original Message -----
>From: R. Sparks Scott <sharkey at mrsharkey.com>
>To: <RE-wrenches at topica.com>
>Sent: Wednesday, September 27, 2000 2:44 PM
>Subject: Re: Sunfrost noise [RE-wrenches]
>
>
>>
>When running on electric, they are virtually silent
>It does require periodic defrosting, but that might be more due to the
>condition of the door seals than the design.
>>  Indoor air pollution: Anybody that doesn't install a petroleum-fueled
>>  appliance in accordance  with approved instructions and codes, i.e:
>venting
>>  it outdoors, is asking for a good dose of CO poisoning!
>>  Payback: This is a hard one, I paid $125 at a flea market. That would be,
>>  uh, $4.80/yr.
>>  Durability: Zero moving parts (except the door!)
>
>
>- - - - - - -
>To send a message:
>  RE-wrenches at topica.com
>
>The archive of previous messages:
>  http://www.topica.com/lists/RE-wrenches/
>
>To unsubscribe send a message to:
>  RE-wrenches-unsubscribe at topica.com
>
>To check out the other RE-Wrench participants:
>  www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine:
>  www.homepower.com
>
>For info contact list moderator by email:
>  michael.welch at homepower.com
>___________________________________________________________
>T O P I C A  The Email You Want. http://www.topica.com/t/16
>Newsletters, Tips and Discussions on Your Favorite Topics

Phil-
I had a Sibir while back till it died (about 10 years average).  I 
experienced the same problem with the burner going out.  Once a year 
nozzle cleaning fixed that.  I find the new Servels much better 
quality than the Sibir, which is no longer sold in the US.
Jon Hill
-- 
-----------------

Sierra Solar Systems
109-N Argall Way
Nevada City, CA 95959
tech info and foreign orders:  (530) 265-8441
order line: (800) 51-SOLAR (US only)   FAX:  (530) 265-6151
e-mail:  <mailto:solarjon at sierrasolar.com>
world wide web:  <http://www.sierrasolar.com>

Because of the high volume of e-mail to which I respond, please
leave _all_ of the previous message (unless it's unbearable) in
   your reply so I can better remember your original message.

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics
</x-flowed>


More information about the RE-Wrenches mailing list