Piss poor Trace SW preformance in "sell" mode. [RE-wrenches]

[Carl Emerson]

Am very keen to solve this issue down here in NZ also.

I am currently installing a 5 kW PV system which I have split into two arrays
with two inverters, one has a SW3048E grid connected with battery backup, the
other an Australian SEA grid tie inverter.

The efficiency of the Trace is a worry but the client wants essential circuits
sustained during power breaks.

Firstly I wondered, following on from Travis, to lower the float voltage and
drop out the grid at night with a photo-relay to allow the unit to enter search
mode . This would seem to address both sources of excess drain.

--
Regards,


Carl Emerson
Manager
FREEPOWER LTD.  "Harnessing Natural Energy"

AUCKLAND
356 East Coast Road, Mairangi Bay, P.O. Box 68-247, AUCKLAND, New
Zealand.
Voice +64 9 478-0404 Mobile 021-633999 Cellfax 021-2919399
Fax +64 9 478-0405 Email  emerson at freepower.co.nz



- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics