[RE-wrenches] SMA SB........ -41 sources, connection box cover

Bill P. Battagin frenergy at psln.com
Sat Jan 31 17:33:14 PST 2026


Jay, 

I was told by the owner and the maintenance person that there was an event where some snow that had built up on the lines, had let go during a melt and sprung up to contact other lines above. We've seen every possible type of snow here in the mid-elevation Sierras, it must have been some weird conditions that even allowed the snow to adhere to the lines in the first place......and then continue to build on that? I don't know more detail than that but PG&E is accepting responsibility for the event. 
Bill 


From: "Jay via RE-wrenches" <re-wrenches at lists.re-wrenches.org> 
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org> 
Cc: "Jay" <jay.peltz at gmail.com> 
Sent: Saturday, January 31, 2026 4:12:50 PM 
Subject: Re: [RE-wrenches] SMA SB........ -41 sources, connection box cover 

Hi bill. 

I’m just wondering how did you confirm pg&E did the surge? 
I’d like to know for my own education 

Thx 
Jay 



On Jan 31, 2026, at 10:06 AM, Bill P. Battagin via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote: 





BQ_BEGIN

Fellow SMA Lovers, 

I have an installation that has 10, SMA SB-1SP-US -40 and -41's PG&E thought it would be a good idea to send a surge into the service of this install so 3 off the inverters were compromised. 

1) I've gone to Ebay for replacements sometimes as SMA would not consider this a warranty issue. Anybody have a source for new or refurbished other than Ebay? 

2) Also it would be good to know, can the bottom connection box covers with displays be swapped/interchanged between different inverters and between -40 and -41 versions? 

Thanks as always, 
Bill 

Feather River Solar Electric
Bill Battagin, owner
4291 Nelson St. (Shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA  95983
530-284-7849, 258-1641(cell)
CA. C10 Lic # 681552/874049
Solar Powered since 1982
Home of the Sunny Side Up 



_______________________________________________ 
List sponsored by Redwood Alliance 

Pay optional member dues here: http://re-wrenches.org 

List Address: RE-wrenches at lists.re-wrenches.org 

Change listserver email address & settings: 
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 

There are two list archives for searching. When one doesn't work, try the other: 
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org 

List rules & etiquette: 
http://www.re-wrenches.org/etiquette.htm 

Check out or update participant bios: 
http://www.members.re-wrenches.org 


BQ_END

_______________________________________________ 
List sponsored by Redwood Alliance 

Pay optional member dues here: http://re-wrenches.org 

List Address: RE-wrenches at lists.re-wrenches.org 

Change listserver email address & settings: 
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 

There are two list archives for searching. When one doesn't work, try the other: 
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org 

List rules & etiquette: 
http://www.re-wrenches.org/etiquette.htm 

Check out or update participant bios: 
http://www.members.re-wrenches.org 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20260131/12e6d374/attachment.htm>


More information about the RE-wrenches mailing list