[RE-wrenches] Mate3s swap

[William Miller]

You all have mixed up your subject lines.

William Miller
Miller Solar.com
805-438-5600
www.millersolar.com


On Mon, Dec 22, 2025 at 2:04 PM Ray Walters via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Outback VFXs that I have worked on, had an LBCO that topped out at 48 v,
> definitely a problem.  Magnum inverters LBCO topped at 49 v, more usable,
> but still too low in my experience.
>
> Ray Walters
> Remote Solar
> On 12/22/2025 2:58 PM, Jay via RE-wrenches wrote:
>
> I don’t agree about either the trace/xantrex SW or the newer Schneider SW
> or Outback fx not having a LBCO that will work with LFP.
>
> The SW has a LBCO of between 16-32v.
>
> Every LFP battery I’ve  used the LBCO of all of those inverters is well
> within the parameters of LFP batteries.
>
>
> I guess there are battereis im not familiar with that have a LBCO outside
> of those parameters.
> Jay
>
>
>
>
>
>
>
> On Dec 22, 2025, at 1:32 PM, Zeke Yewdall via RE-wrenches
> <re-wrenches at lists.re-wrenches.org> <re-wrenches at lists.re-wrenches.org>
> wrote:
>
> 
> I've done a lot of Mate3s swaps over the years, as they are not the most
> reliable piece of equipment, and I never involved outback in it.   If I
> recall, you just link the new mates mac ID to the plant in opticsRE, and
> delete the old one.  Whether you lose all of the old data when doing that I
> can't remember -- probably so.   Perhaps just name the old one old data,
> and keep it on the portal rather than deleting it, and use the new one
> going forwards.
>
> Zeke
>
>
> Subject: [RE-wrenches]
>
>
> Message-ID:
>         <CAAgpqUO7J2g380v8VbE472C5U=rhD=
> kE8-yyiW+_1oNaKcoBrg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Friends:
>
> I need to swap a Mate3s. This requires help from Outback. They are not
> answering texts, emails or phone calls.
>
> Is there any way one can make this swap without Outback?
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20251222/f7379206/attachment.htm>