[RE-wrenches] Mate3s swap

[Ray Walters]

Outback VFXs that I have worked on, had an LBCO that topped out at 48 v, 
definitely a problem.  Magnum inverters LBCO topped at 49 v, more 
usable, but still too low in my experience.

Ray Walters
Remote Solar

On 12/22/2025 2:58 PM, Jay via RE-wrenches wrote:
> I don’t agree about either the trace/xantrex SW or the newer Schneider 
> SW or Outback fx not having a LBCO that will work with LFP.
>
> The SW has a LBCO of between 16-32v.
>
> Every LFP battery I’ve  used the LBCO of all of those inverters is 
> well within the parameters of LFP batteries.
>
>
> I guess there are battereis im not familiar with that have a LBCO 
> outside of those parameters.
> Jay
>
>
>
>
>
>
>
>> On Dec 22, 2025, at 1:32 PM, Zeke Yewdall via RE-wrenches 
>> <re-wrenches at lists.re-wrenches.org> wrote:
>>
>> 
>> I've done a lot of Mate3s swaps over the years, as they are not the 
>> most reliable piece of equipment, and I never involved outback in 
>> it.   If I recall, you just link the new mates mac ID to the plant in 
>> opticsRE, and delete the old one.  Whether you lose all of the old 
>> data when doing that I can't remember -- probably so.   Perhaps just 
>> name the old one old data, and keep it on the portal rather than 
>> deleting it, and use the new one going forwards.
>>
>> Zeke
>>
>>
>> Subject: [RE-wrenches]
>>
>>
>> Message-ID:
>>         
>> <CAAgpqUO7J2g380v8VbE472C5U=rhD=kE8-yyiW+_1oNaKcoBrg at mail.gmail.com 
>> <mailto:kE8-yyiW%2B_1oNaKcoBrg at mail.gmail.com>>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Friends:
>>
>> I need to swap a Mate3s. This requires help from Outback. They are not
>> answering texts, emails or phone calls.
>>
>> Is there any way one can make this swap without Outback?
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try 
>> the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20251222/28d2fe2e/attachment.htm>