[RE-wrenches] Lynk discover question

[Dave Angelini Offgrid Solar]

Link1, that is old! All lynk11 now for 5+ years. I do not have the 
manual but you can get it from Discover. "Some years old" How old?

Since you can't see the State of life without a spreadsheet on this 
without excel and a bit of work, you could look at voltage. your idea is 
good. Below won't help much but check and wiggle all connections and it 
sounds like you know it is not a cable.

4.4.2 Verification of AEBus Network Connections
To verify that all batteries are communicating over AEBus follow the 
steps below:
* SCP (System Status Screen) → Enter Button → (Select Device Screen) → ▲ 
and ▼ buttons to select (BattMon 00 /
Discover AES) → press Enter/▲/▼ buttons at the same time to enable 
access to → (Advanced Settings Menu)

Product 44-24-2800 42-48-6650 44-48-3000
Capacity 110 Ah x number of batteries 130 Ah x number of batteries 57 Ah 
x number of batteries
If the connection is unsuccessful, check that network is correctly 
terminated and for any damage to the network cabling,
terminators and connectors.. Rectify any problems and verify again.

The guitar amps for David St. Hubbins in Spinal tap go to 11 😉

Good Luck!

Dave Angelini Offgrid Solar
"we go where powerlines don't"
    [1]https://offgridsolar1.com/ [2]  [1]
e-mail  offgridsolar at sti.net
text 209 813 0060

On 2025-09-16 2:39 pm, Jay via RE-wrenches wrote:

> I've got a customer with the lynk 1. Non web based.
> 3 batteries with an Outback radian, some years old at this point.
> 
> Everything is working, the fndc vs the lynk % are not in sync. Which I 
> can probably get right by some tweaks.
> 
> But my biggest question is the lynk won't go to 100% or 10 bars. It's 
> only going to 9.
> 
> I can't find any info as to why that would be. I've pushed up the 
> charge volts a bit thinking if it was a BMS calibration that would fix 
> it as it has with other lithium batteries, didn't work.
> 
> Customer has tried the lynk into each battery and they all read the 
> same bars, which is good.
> 
> Could it be the 9 bars is now max full due to age?
> 
> Thanks in advance
> 
> Jay
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try 
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org


Links:
------
[1] http://members.sti.net/offgridsolar/
[2] https://offgridsolar1.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250916/f967bd9f/attachment.htm>