<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /></head><body style='font-size: 12pt; font-family: Verdana,Geneva,sans-serif'>
<p>Link1, that is old! All lynk11 now for 5+ years. I do not have the manual but you can get it from Discover. "Some years old" How old?</p>
<p>Since you can't see the State of life without a spreadsheet on this without excel and a bit of work, you could look at voltage. your idea is good. Below won't help much but check and wiggle all connections and it sounds like you know it is not a cable.</p>
<p>4.4.2 Verification of AEBus Network Connections<br />To verify that all batteries are communicating over AEBus follow the steps below:<br />• SCP (System Status Screen) → Enter Button → (Select Device Screen) → ▲ and ▼ buttons to select (BattMon 00 /<br />Discover AES) → press Enter/▲/▼ buttons at the same time to enable access to → (Advanced Settings Menu)<br /><br />Product 44-24-2800 42-48-6650 44-48-3000<br />Capacity 110 Ah x number of batteries 130 Ah x number of batteries 57 Ah x number of batteries<br />If the connection is unsuccessful, check that network is correctly terminated and for any damage to the network cabling,<br />terminators and connectors.. Rectify any problems and verify again. </p>
<p>The guitar amps for David St. Hubbins in Spinal tap go to 11 <span style="font-size: 18pt;">😉</span></p>
<div id="signature"><span style="color: #bfbfbf; font-family: Roboto, Arial, sans-serif;"><span style="font-size: 14px; background-color: #1f1f1f;">Good Luck! </span></span><br />
<pre> </pre>
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" rel="noopener"> </a><a style="color: blue; font-size: 11px; font-family: 'Lucida Grande', Verdana, Arial, Helvetica, sans-serif; font-weight: 400; background-color: #ffffff;" href="https://offgridsolar1.com/" rel="noopener noreferrer"><span style="font-size: 12pt;">https://offgridsolar1.com/</span></a><a href="http://members.sti.net/offgridsolar/" rel="noopener"> </a>
e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p><br /></p>
<p id="reply-intro">On 2025-09-16 2:39 pm, Jay via RE-wrenches wrote:</p>
<blockquote type="cite" style="padding: 0 0.4em; border-left: #1010ff 2px solid; margin: 0">
<div class="pre" style="margin: 0; padding: 0; font-family: monospace"><br />I’ve got a customer with the lynk 1. Non web based. <br />3 batteries with an Outback radian, some years old at this point. <br /><br />Everything is working, the fndc vs the lynk % are not in sync. Which I can probably get right by some tweaks. <br /><br />But my biggest question is the lynk won’t go to 100% or 10 bars. It’s only going to 9. <br /><br />I can’t find any info as to why that would be. I’ve pushed up the charge volts a bit thinking if it was a BMS calibration that would fix it as it has with other lithium batteries, didn’t work. <br /><br />Customer has tried the lynk into each battery and they all read the same bars, which is good. <br /><br />Could it be the 9 bars is now max full due to age?<br /><br />Thanks in advance<br /><br />Jay<br /><br /><br /><br /><br /><br /><br /><br /><br />_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank" rel="noopener noreferrer">http://re-wrenches.org</a><br /><br />List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank" rel="noopener noreferrer">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">http://www.members.re-wrenches.org</a><br /><br /></div>
</blockquote>
</body></html>