[RE-wrenches] 750 kcmil pulling

[Matt Partymiller]

Mandrel is smart.  I would pull with a clevis and compression grips of staggered lengths, though it seems like your pipe is plenty large.

Matt



From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of david quattro via RE-wrenches
Sent: Wednesday, August 27, 2025 11:14 AM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Cc: david quattro <david at quattrosolar.com>
Subject: [RE-wrenches] 750 kcmil pulling

Caution: This email originated from outside SES. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Hi everyone, I have a wire pull coming up where each 4" conduit will have (2) 750 kcmil aluminum plus (2) 3/0 aluminum. I think this pull will proceed just like previous similar wire pulls, but I want to see if there are important tricks/details I should know about 750 kcmil size. I plan to rent the biggest tugger available and to have a bucket of lube stationed at the pipe entrance. We already ran mandrels through all conduits. The longest pull is about 500 ft. Thanks!
David
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250827/8dbbfb27/attachment.htm>