[RE-wrenches] Outback AGS issue

[Jay]

I have seen this issue many times. 

You can try to do firmware update. 

Sometimes it works sometimes not. 
The mate3s is more stable for ags. 

Jay 

> On Jun 2, 2025, at 2:18 PM, Jeremy Rodriguez via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> Wrenches
> I’ve got an original MATE ( tan oval )
> , dual VFX set up that will not start before the inverter reaches LBCO, I believe. I need to confirm the actual inverter error.
> I tested the AGS function and it did start with the 2 min trigger VDC, and stop after the set Absorb time was reached.
> The customer reported that two days later, they lost power and the generator had failed to start.
> I am thinking now to try a new MATE3SL
> Is this the best next step to try and get this problem solved ?  Any other testing suggestions?
> New Generac Ecogen
> 
> Regards,
> 
> Jeremy Rodriguez
> Solar Installation / Design
> All Solar, Inc.
> 1453 M St.
> Penrose Colorado 81240
> 
> Sent by Jeremy's iPhone. Sorry for typos and shorthand.
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>