[RE-wrenches] Sol-Ark 15k Conduit Entries

[Michael Morningstar]

10x10 gutter. Notice within, a 2.5x2.5 gutter for comms. 1 x 2.5" nipples
work well. Chase nipples wont due to door clearance. I've also cut the
bottoms out of the Sol-Arks and a corresponding square window in the
gutter,  placed a 1/4" rubber gasket between the two. We do that when we
have many VFD's over a gutter. Someone a while ago asked for a picture
showing how we make long bussbars. This one is 24' long.

On Wed, Aug 2, 2023 at 10:08 AM Jerry Shafer via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Jason
> In plenty of applications l will use couplers with chase nipples, height
> is one issue but installed working height is very important. I use a 8"x8"x
> X gutter and sometimes even off set that from the wall, l have had AHJ not
> want to see mixed cables LVDC and AC in the same conduit so pass through
> the battery conductors right out the bottom and to the battery. I just
> create a template for punching into the gutter, looks clean and is safe
> with easy access to the display
> Fun times
>
> On Wed, Aug 2, 2023, 8:04 AM Jason Szumlanski via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> I see a lot of pictures with conduit nipples coming out of a gutter that
>> are fairly long. I have a height limit issue and I'm wondering if there are
>> any negative implications of using very short nipples between a wireway
>> below and the inverter. I'm thinking about using close nipples or perhaps
>> 2-in nipples if I have enough room.
>>
>> If there are any practical reasons that this will not work well, please
>> let me know.
>>
>> Jason Szumlanski
>> Florida Solar Design Group
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>

-- 

Michael Morningstar


Morningstar Electric

PO Box 1494

Mount Shasta, CA 96067

530-921-0560

mjmorningstar at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230802/f263637c/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Sol ark nipple.jpeg
Type: image/jpeg
Size: 258830 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230802/f263637c/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Gutter.jpeg
Type: image/jpeg
Size: 233297 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230802/f263637c/attachment-0003.jpeg>