[RE-wrenches] Sol-Ark 15k Conduit Entries

[Jerry Shafer]

Jason
In plenty of applications l will use couplers with chase nipples, height is
one issue but installed working height is very important. I use a 8"x8"x X
gutter and sometimes even off set that from the wall, l have had AHJ not
want to see mixed cables LVDC and AC in the same conduit so pass through
the battery conductors right out the bottom and to the battery. I just
create a template for punching into the gutter, looks clean and is safe
with easy access to the display
Fun times

On Wed, Aug 2, 2023, 8:04 AM Jason Szumlanski via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> I see a lot of pictures with conduit nipples coming out of a gutter that
> are fairly long. I have a height limit issue and I'm wondering if there are
> any negative implications of using very short nipples between a wireway
> below and the inverter. I'm thinking about using close nipples or perhaps
> 2-in nipples if I have enough room.
>
> If there are any practical reasons that this will not work well, please
> let me know.
>
> Jason Szumlanski
> Florida Solar Design Group
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230802/fecd24fa/attachment.htm>