[RE-wrenches] RE-wrenches] replace part of rolls battery bank
John Blittersdorf
john.blittersdorf at gmail.com
Thu Apr 6 15:04:51 PDT 2023
Multiple battery banks work well as long as you are consuming. When
charging the charge parameters change. I’m running 8 Interstate L16’s, 1
Fortress e-flex, And 3 Simpliphi 3.8. With big switches between them. I
was using all three but changing charge parameters on
My two controllers and inverter got to be too much trouble. I ran all with
lithium settings but I’m retiring the L16s and putting in a second eFlex.
2 eFlex or 3 Simpliphis do a great job replacing the 8. The 3 simpliphis
will be leaving for their summer home at a fishing club. Hi
John B
On Thu, Apr 6, 2023 at 11:50 AM Dave Angelini Offgrid Solar via RE-wrenches
<re-wrenches at lists.re-wrenches.org> wrote:
> And the next step for hi reliability offgrid is to have both types of
> battery in there own independent inverter power systems. Just switch the DC
> bus from one power system or the other. I like the LFP just turned off
> sitting as a spare power system. You can rotate or do a monthly test like
> it is a genset.
>
> This is also a good way to use up the old flooded and retire it when it
> becomes useless and ready to recycle. Some LFP manufactures do provide a
> spare BMS but probably better to just have an extra battery at the offgrid
> home.
>
>
>
> *Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/>
> e-mail offgridsolar at sti.net <offgridsolar at sti.net>
> text 209 813 0060*
>
>
> On 2023-04-05 6:30 pm, Scot Arey via RE-wrenches wrote:
>
> Just attended the NABCEP conference last week and took in CEU classes from
> Rolls and Midnite on battery charging and design. Just awesome classes and
> I walked away thinking the FLA were kind of like my old 7.3 Powerstroke
> diesel…I could work on them and could see when issues were developing. The
> lithium batteries are kind of like my 6.7 PSD. Great power, fast but when
> something happens with a BMS…no idea except to go to the manufacturer.
>
>
>
> Just wanted to share this after reading your awesome post.
>
>
>
> Scot
>
>
>
> *From:* RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> *On
> Behalf Of *Tump via RE-wrenches
> *Sent:* Wednesday, April 5, 2023 6:24 PM
> *To:* RE-wrenches <re-wrenches at lists.re-wrenches.org>
> *Cc:* Tump <tump at swnl.net>
> *Subject:* Re: [RE-wrenches] RE-wrenches] replace part of rolls battery
> bank
>
>
>
> I would suggest that adding additional batteries to increase battery
> voltages is fine 48 to 54V or what ever, I too have used this many times on
> very remote sites. Please also increase your inverters hi voltage cut out
> settings, as this can be a real bummer having the system shut down in full
> sun.
>
> Another thing; IF you have battery strings, cables of equal length from
> each string should be connected to a buss bar then buss bar to inverter or
> inverters, this will reduce wiring headaches, voltage drop as well as
> providing equal charging to all strings. (depending on internal resistance).
>
> I would also suggest fewer batteries of bigger cells. My preference is 2
> volt cells, less holes to water, less copper interconnects. Yeah there
> heavy but for hi charging & discharging, a large battery is always my
> choice. OR the Surrette 6CS25P has been the MOST reliable battery Surrette
> has put out. After almost 30 + years of installing their batteries this one
> has been the best. They do have a EX series 2 Volt cell that has the same
> plate thickness as the 6 CS but I have had issues w/ them. IF you are using
> the EX 2 volt check the polarity PRIOR to installing them & mark the
> positive side. I have had the plastic covers installed incorrectly and it
> plays havoc on your install.
>
> Yep LEADITE I am, refractometer and a DVOM and I have a client that can
> spot problems way before things become critical. AND that Surrette
> warrantee Pit BULL Mr. Higgins & your client will be very happy when Steve
> OKs a replacement because you have recorded your Spg readings.
>
> My $.02 TUMP
>
>
>
> On Apr 5, 2023, at 5:26 PM, greg egan via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>
>
> Danny, My experience is if you are careful and use *equal length
> conductors* for all 3 strings you can get good results. The main problem
> I have with 3 strings of 6 V cells @ 48 vdc is leaving the customer with 72
> cells to check and fill. That's a lot of work if you don't have a watering
> system.
>
> I totally get why you'd want to give them 2 strings in case they lose a
> battery or 2. Most of my off grid customers live quite a ways from the
> battery store and it's not uncommon for it to take a month to get
> replacements - during the best of times.
>
> Another option I've done is give them a string of 25 - 2V cells for a 48V
> system. You just set the charging parameters accordingly and go. That
> way if they lose a cell or two, the remaining battery bank should be able
> to keep them limping along until the replacement battery(s) show up. Need
> to check and *make sure* your charge controller and inverter can charge
> at the slightly higher V but usually that's not a problem.
>
> Best,
>
> Greg Egan
> Remote Power Inc.
>
> greg at remotepowerinc.com
>
>
>
>
> Message: 1
>
> Date: Tue, 4 Apr 2023 20:45:44 +0000
>
> From: Daniel Young <danny at sesre.com> <danny at sesre.com>
>
> To: "offgridsolar at sti.net" <offgridsolar at sti.net> <offgridsolar at sti.net> <offgridsolar at sti.net>, RE-wrenches
>
> <re-wrenches at lists.re-wrenches.org> <re-wrenches at lists.re-wrenches.org>
>
> Subject: Re: [RE-wrenches] replace part of rolls battery bank
>
> Message-ID:
>
> <BL1PR12MB5921CDE5991F65FA842BC82CBB939 at BL1PR12MB5921.namprd12.prod.outlook.com> <BL1PR12MB5921CDE5991F65FA842BC82CBB939 at BL1PR12MB5921.namprd12.prod.outlook.com>
>
>
>
> Content-Type: text/plain; charset="utf-8"
>
>
>
> Thanks all for the advice. I figured it was not worth trying on a different battery brand. I honestly needed to be able to tell them I researched it and asked my peers.
>
>
>
> The client really uses the 3 x strings they have and did not really want to go down to 3. They are currently choosing to get the two Rolls under the prorated warranty, and hopes to get another 2 useful years out of the bank before planning to replace.
>
>
>
> Already prepared him on the cost of the equivalent Li+ at todays prices. So he knows roughly where he is heading.
>
>
>
> Side note: I am in the camp of trying for 2 x strings when possible (agree that 3 x strings is the absolute limit, and not the best option), simply because if a single cell goes bad, I don?t want a client with essentially nothing available until we can get a replacement and get on site. With 2 strings, they can make due at least. That?ll go out the window with Lithium though. Looking at Fortress Power for the next battery bank for this client. But we will see what changes in the market by the time it?s needed.
>
>
>
> With Regards,
>
> --
>
>
>
> Danny Young
>
> NABCEP PV Installation Professional #031508-90
>
> Engineering Team Lead
>
> Solar Energy Solutions
>
> Lexington | Louisville | Bloomington | Cincinnati | Evansville | Indianapolis
>
> 513-448-5176 (mobile)
>
> 877-312-7456 (Main Office)
>
> danny at sesre.com<mailto:danny at sesre.com> <danny at sesre.com>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
>
>
>
>
>
>
>
>
>
> "We must all learn to live together as brothers,
>
> or we all will perish as fools."
>
> MLK
>
>
>
>
>
>
>
>
>
>
>
> *Tump3391 at gmail.com <3391 at gmail.com>* *www.SWNL.net*
>
> Solarwinds Northernlights
>
> * Serving Mid Coast Maine & Northern California*
> * 207-832-7574 Cl.
> 610-517-8401 *
>
> *Blair "TUMP" May*
>
>
> * ******** MAINE'S CHARTER ******** **
> NABCEP "Certified PV Installer"*
>
>
> * ******** MAINE'S CHARTER ******** **
> Trace Xantrex "Certified" Dealer / Installer"*
>
>
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230406/356ffc9a/attachment.htm>
More information about the RE-wrenches
mailing list