[RE-wrenches] Attaching Array To or Through Ply
frenergy
frenergy at psln.com
Wed Mar 29 08:31:54 PDT 2023
Matt,
I guess my questions are 1/2" plywood or 5/8" and how thick
is the foam? Oh and I assume its nominal 2X6 T&G? Do you know how the
plywood is attached?.....through the foam into the T&G?... to stringers,
nailers or whatever they're called?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
On 3/29/2023 7:53 AM, Dave Tedeyan via RE-wrenches wrote:
> Hi Matt,
> I've used these in the past when on a comp roof and there was no good
> way to get into the rafters (or TJI's in this case)
> https://sunmodo.com/nanomount/
>
> You might want to replace the screws with something shorter and
> beefier though to get more grip if you are only going into 1/2" plywood.
>
> Cheers,
> Dave
>
> On Wed, Mar 29, 2023 at 10:38 AM Matt Sherald via RE-wrenches
> <re-wrenches at lists.re-wrenches.org> wrote:
>
> Hi All,
>
> I've run into a roof-mounted job where the roof is built-up with
> the following:
>
> Comp shingle
> Plywood
> Foam board
> T&G (roof deck, but also interior ceiling)
>
> The beams that hold the t&g up are wide-spaced and not convenient
> for fastening the full extent of the array.
>
> This being the case, I was considering other fastening options and
> am writing to pick the collective brain of the Wrenches to see how
> others have addressed similar situations.
>
> One thought I had was to use the PLP Easy Mounting Foot and I'd be
> glad for any opinions on that or another solution.
>
> -Matt
>
> --
> Matt Sherald
> PIMBY Energy, LLC
> 304-704-5943
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work,
> try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
>
> --
> Logo <https://www.sungineersolar.com/>
> Dave Tedeyan, P.E.
> Owner | Sungineer Solar
> p: he | him | his
> a: 1653 Slaterville Rd. | Ithaca, NY 14850
> w: www.sungineersolar.com <http://www.sungineersolar.com/>
> c: (607) 288-2898
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
--
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230329/2caac08a/attachment.htm>
More information about the RE-wrenches
mailing list