[RE-wrenches] Attaching Array To or Through Ply

[Jerry Shafer]

Wrenches
Sounds like a SIP's type product, there are quite a few multi hole
attachment bases that are designed for SIP's. Most will have a larger base,
lots of holes for screws to attach that do not require rafters underneath
to attach.
Fun times

On Wed, Mar 29, 2023, 8:30 AM frenergy via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Matt,
>
>             I guess my questions are 1/2" plywood or 5/8" and how thick is
> the foam?  Oh and I assume its nominal 2X6 T&G?  Do you know how the
> plywood is attached?.....through the foam into the T&G?... to stringers,
> nailers or whatever they're called?
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.(shipping)
> 5575 Genesee Rd. (USPS, UPS)
> Taylorsville, CA 95983
> 530.284.1925 Office/ 530.258.1641 Cell
> CA Lic 874049
> Solar powered since 1982
>
> On 3/29/2023 7:53 AM, Dave Tedeyan via RE-wrenches wrote:
>
> Hi Matt,
> I've used these in the past when on a comp roof and there was no good way
> to get into the rafters (or TJI's in this case)
> https://sunmodo.com/nanomount/
>
> You might want to replace the screws with something shorter and beefier
> though to get more grip if you are only going into 1/2" plywood.
>
> Cheers,
> Dave
>
> On Wed, Mar 29, 2023 at 10:38 AM Matt Sherald via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Hi All,
>>
>> I've run into a roof-mounted job where the roof is built-up with the
>> following:
>>
>> Comp shingle
>> Plywood
>> Foam board
>> T&G (roof deck, but also interior ceiling)
>>
>> The beams that hold the t&g up are wide-spaced and not convenient for
>> fastening the full extent of the array.
>>
>> This being the case, I was considering other fastening options and am
>> writing to pick the collective brain of the Wrenches to see how others have
>> addressed similar situations.
>>
>> One thought I had was to use the PLP Easy Mounting Foot and I'd be glad
>> for any opinions on that or another solution.
>>
>> -Matt
>>
>> --
>> Matt Sherald
>> PIMBY Energy, LLC
>> 304-704-5943
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>>
>
> --
> [image: Logo] <https://www.sungineersolar.com/>
> Dave Tedeyan, P.E.
> Owner | Sungineer Solar
> p: he | him | his
> a: 1653 Slaterville Rd. | Ithaca, NY 14850
> w: www.sungineersolar.com <http://www.sungineersolar.com/>
> c: (607) 288-2898
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:http://www.members.re-wrenches.org
>
> --
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> Virus-free.www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> <#m_5060834515090526244_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230329/701f049b/attachment.htm>