[RE-wrenches] Enphase ACM to rail mount plate

[Mac Lewis]

Its actually the alumium flange that is typically tapped into the
microinverter plastic housing that I'm after (the part that is attached to
the rail during installation).  In this case, the micros were in held a
plastic bracket that was glued onto the module backsheet and so the
standard mounting flange wasn't part of the set up.  This is certainly a
disadvantage of an AC module...

On Thu, Feb 23, 2023 at 11:13 AM William Miller via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Mac:
>
>
>
> Maybe the SnapnRack MLPE flange kit is what you need?
>
>
>
>
> https://snapnrack.com/wp-content/uploads/2019/07/SNR_MLPE-Frame-Attachment-Kit-Installation-Manual_v.1.1.pdf
>
>
>
>
>
> William
>
>
>
> Miller Solar
>
> 17395 Oak Road, Atascadero, CA 93422
>
> 805-438-5600
>
> www.millersolar.com
>
> CA Lic. 773985
>
>
>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
> Behalf Of *Mac Lewis via RE-wrenches
> *Sent:* Thursday, February 23, 2023 9:56 AM
> *To:* RE-wrenches
> *Cc:* Mac Lewis
> *Subject:* [RE-wrenches] Enphase ACM to rail mount plate
>
>
>
> Hello Wrenches,
>
>
>
> We are in the middle of planning for a full solar panel replacement at a
> house with AC modules.  It was a Solaria 355 with an Enphase IQ7+.  Solaria
> is going to replace the modules with a standard module, not an AC module
> (MC4 cabling not an Q Cable to J-box).  This seems OK but the issue is the
> that microinverters don't have an integrated plate to mount to the existing
> rail.
>
>
>
> I've talked with Enphase and it doesn't appear that they are willing to
> sell us this mounting flange plate (or it could have been too unusual for
> this particular tech support contact to deal with).  Im sure I can fab up
> something, but curious if anyone has dealt with this?  Or has a good
> contact at enphase that might be able to help with this unusual request.
>
>
>
> Thanks in advance!
>
>
>
> --
>
>
>
>
>
>
>
> Mac Lewis
>
> "Yo solo sé que no sé nada." *-Sócrates*
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>

-- 



Mac Lewis

*"Yo solo sé que no sé nada." -Sócrates*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230223/b6e46d39/attachment.htm>