[RE-wrenches] Enphase ACM to rail mount plate

[William Miller]

Mac:



Maybe the SnapnRack MLPE flange kit is what you need?



https://snapnrack.com/wp-content/uploads/2019/07/SNR_MLPE-Frame-Attachment-Kit-Installation-Manual_v.1.1.pdf





William



Miller Solar

17395 Oak Road, Atascadero, CA 93422

805-438-5600

www.millersolar.com

CA Lic. 773985





*From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
Behalf Of *Mac Lewis via RE-wrenches
*Sent:* Thursday, February 23, 2023 9:56 AM
*To:* RE-wrenches
*Cc:* Mac Lewis
*Subject:* [RE-wrenches] Enphase ACM to rail mount plate



Hello Wrenches,



We are in the middle of planning for a full solar panel replacement at a
house with AC modules.  It was a Solaria 355 with an Enphase IQ7+.  Solaria
is going to replace the modules with a standard module, not an AC module
(MC4 cabling not an Q Cable to J-box).  This seems OK but the issue is the
that microinverters don't have an integrated plate to mount to the existing
rail.



I've talked with Enphase and it doesn't appear that they are willing to
sell us this mounting flange plate (or it could have been too unusual for
this particular tech support contact to deal with).  Im sure I can fab up
something, but curious if anyone has dealt with this?  Or has a good
contact at enphase that might be able to help with this unusual request.



Thanks in advance!



-- 







Mac Lewis

"Yo solo sé que no sé nada." *-Sócrates*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230223/a6213c0f/attachment.htm>