[RE-wrenches] Undersize wire on REC meter lug

[Jerry Shafer]

Daniel
What is the minimum size the lug will except
Jerry

On Fri, Sep 2, 2016 at 9:33 AM, Daniel Tittmann <daniel at greenwired.com>
wrote:

> wondering if anyone has a simple lug solution for a problem i found my
> self in.
> with out looking I used a meter socket for a REC meter that is not rated
> for #12 AWG wire.  it is on a 20 breaker but wire size is too small for the
> lugs.  Is there a simple Lug solution that will pass muster or do I need to
> up size wire or swap out the meter socket?
>
> problem with up sizing the wire is we ran 1/2 conduit so we can only go up
> to #10. without overfilling or replacing the conduit run.
> Hoping there is experience out there that can point me to a simple
> solution.
> Thanks
>
> Daniel Tittmann
> CTO
> Greenwired
> www.greenwired.com
> daniel at greenwired.com
> 707-923-2001 (office)
> 707-206-5088 (Cell)
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160902/8788c4d4/attachment-0002.html>