[RE-wrenches] Radian GSLC

[jay]

Hi William,

 One easy upgrade would be the use of Arctic Ultra flex wire.   It would put almost no stress on the breaker connections. 

I haven’t done this yet, but I plan on doing it for the next GSLC that I install.  

jay
peltz power


> On May 12, 2016, at 11:52 AM, William Miller <william at millersolar.com> wrote:
> 
> Wrenches:
>  
> The recent topic about bypass connections for the Radian is a very pertinent issue for anyone designing a Radian system.  The problem is exacerbated by what I perceive is one poor design aspect of the GSLC cabinet.  
>  
> I generally like the Radian series, including the GSLC.  I do find it puzzling that installers are expected to make connections to the rear of panel mount circuit breakers.  This has to be done blind and in very tight quarters.  This is further complicated by the expectation that one will install AC and DC circuit breakers in the same panel.
>  
> We have tried leaving slack on the leads so the panel can be rotated, but that leaves more lead length than the cabinet will handle.  
>  
> Our solution is to move all AC breakers out of the GSLC and into adjacent, off-the-shelf load centers.  
>  
> We put the minimum PV breakers in the panel, located at the top for maximum latitude on tilting the panel out for access.  We also pre-install the breakers in the panel in a bench vise with extra lead length and install the panel as a unit, hopefully never requiring access to the rear again.
>  
> I applaud the GSLC as a decent product, but it does need improvement in this area.
>  
> Sincerely,
>  
> William Miller
>  
>  
> <image003.jpg>
> Lic 773985
> millersolar.com <http://www.millersolar.com/>
> 805-438-5600
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160512/37ce01ea/attachment-0002.html>