[RE-wrenches] Optics RE with two hubs.
Jay
jay.peltz at gmail.com
Tue May 3 09:21:37 PDT 2016
Nope doesn't care.
You could have 1 shunt or 3.
You just get to monitor the 3 shunts.
The m3 display uses comm from the cc
Jay
Sent from my iPhone
> On May 3, 2016, at 8:44 AM, William Miller <william at millersolar.com> wrote:
>
> Jay:
>
> Thanks for the reply. I meant label the shunts. Doesn't the FNDC need to differentiate between PV charge and inverter charge?
>
> William
>
>> On May 3, 2016, at 7:18 AM, Jay <jay.peltz at gmail.com> wrote:
>>
>> Hi William,
>>
>> Yes you need the shunt for PV the FNDC to read correctly
>>
>> I'm not sure exactly what you mean about labeling the cc?
>> The FNDC doesn't care what each shunt does. Cc, inverter DC loads etc, if that's what you mean
>>
>>
>> Jay
>> Peltz power.
>>
>>
>>
>>
>>> On May 3, 2016, at 12:10 AM, William Miller <william at millersolar.com> wrote:
>>>
>>> Friends:
>>>
>>> I am setting up an Optics RE system with a system that has 8 FX inverters and 3 charge controllers. I installed two Mate3s and a Flexnet-DC. I need two shunts for the Inverters because 4 are connected in one DC1000 and 4 in the other. I installed a third shunt for the PV.
>>>
>>> The inverter Mate3 and Flexnet connects into one 10 port hub and the PV Mate3 connects into another hub with the charge controllers.
>>>
>>> Do I really need the PV shunt? How is the Flexnet processing charge current if it does not know there are charge controllers?
>>>
>>> I can’t seem to find the screen where you label the charge controllers. I am used to setting these up with Radians. Am I missing something?
>>>
>>> Any help is appreciates. Because when I posed this question to Outback and got the audible equivalent to a blank stare:
>>>
>>>
>>> Thanks in advance,
>>>
>>> William Miller
>>>
>>>
>>> <image003.jpg>
>>> Lic 773985
>>> millersolar.com
>>> 805-438-5600
>>>
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160503/ebf85b83/attachment-0002.html>
More information about the RE-wrenches
mailing list