[RE-wrenches] Optics RE with two hubs.
William Miller
william at millersolar.com
Tue May 3 08:44:44 PDT 2016
Jay:
Thanks for the reply. I meant label the shunts. Doesn't the FNDC need to differentiate between PV charge and inverter charge?
William
> On May 3, 2016, at 7:18 AM, Jay <jay.peltz at gmail.com> wrote:
>
> Hi William,
>
> Yes you need the shunt for PV the FNDC to read correctly
>
> I'm not sure exactly what you mean about labeling the cc?
> The FNDC doesn't care what each shunt does. Cc, inverter DC loads etc, if that's what you mean
>
>
> Jay
> Peltz power.
>
>
>
>
>> On May 3, 2016, at 12:10 AM, William Miller <william at millersolar.com> wrote:
>>
>> Friends:
>>
>> I am setting up an Optics RE system with a system that has 8 FX inverters and 3 charge controllers. I installed two Mate3s and a Flexnet-DC. I need two shunts for the Inverters because 4 are connected in one DC1000 and 4 in the other. I installed a third shunt for the PV.
>>
>> The inverter Mate3 and Flexnet connects into one 10 port hub and the PV Mate3 connects into another hub with the charge controllers.
>>
>> Do I really need the PV shunt? How is the Flexnet processing charge current if it does not know there are charge controllers?
>>
>> I can’t seem to find the screen where you label the charge controllers. I am used to setting these up with Radians. Am I missing something?
>>
>> Any help is appreciates. Because when I posed this question to Outback and got the audible equivalent to a blank stare:
>>
>>
>> Thanks in advance,
>>
>> William Miller
>>
>>
>> <image003.jpg>
>> Lic 773985
>> millersolar.com
>> 805-438-5600
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160503/10472ebe/attachment-0002.html>
More information about the RE-wrenches
mailing list