[RE-wrenches] Optics RE with two hubs.

[Jay]

Hi William,

Yes you need the shunt for PV the FNDC to read correctly 

I'm not sure exactly what you mean about labeling the cc?
The FNDC doesn't care what each shunt does. Cc, inverter DC loads etc, if that's what you mean


Jay
Peltz power. 




> On May 3, 2016, at 12:10 AM, William Miller <william at millersolar.com> wrote:
> 
> Friends:
>  
> I am setting up an Optics RE system with a system that has 8 FX inverters and 3 charge controllers.  I installed two Mate3s and a Flexnet-DC.  I need two shunts for the Inverters because 4 are connected in one DC1000 and 4 in the other.  I installed a third shunt for the PV.
>  
> The inverter Mate3 and Flexnet connects into one 10 port hub and the PV Mate3 connects into another hub with the charge controllers.
>  
> Do I really need the PV shunt?  How is the Flexnet processing charge current if it does not know there are charge controllers?
>  
> I can’t seem to find the screen where you label the charge controllers.  I am used to setting these up with Radians.  Am I missing something?
>  
> Any help is appreciates. Because when I posed this question to Outback and got the audible equivalent to a blank stare:
>  
>  
> Thanks in advance,
>  
> William Miller
>  
>  
> <image003.jpg>
> Lic 773985
> millersolar.com
> 805-438-5600
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160503/faea92b8/attachment-0002.html>