[RE-wrenches] Increasing output Amps, Off Grid
Jay
jay.peltz at gmail.com
Tue Feb 2 07:51:16 PST 2016
That's a very trick way to do it!
A somewhat less expensive way would be to use a 3rd VFX on the leg you want the added power on.
Jay
Peltz power.
> On Feb 1, 2016, at 9:09 PM, William Miller <william at millersolar.com> wrote:
>
> Jeremy:
>
> I have often wondered this question since the Trace SW days: Since the
> Radian offers generator support, why not connect the FX inverters to the
> generator input of the Radian? Program the Radian to expect 30 amps per
> leg. If the load exceeds 30 amps, the Radian will kick into gen-support
> mode and aid the FX inverters. If the load is less than 30 amps, the
> Radian goes to sleep.
>
> William
>
>
>
> Lic 773985
> millersolar.com
> 805-438-5600
>
>
> -----Original Message-----
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
> Behalf Of Jeremy Rodriguez
> Sent: Monday, February 01, 2016 7:57 PM
> To: re-wrenches at lists.re-wrenches.org
> Subject: [RE-wrenches] Increasing output Amps, Off Grid
>
> Hello
> I don't think an OB Radian can be added to an existing stacked pair of
> FX's. At least easily and have all three inverters work happily with each
> other. Can it?
>
> My client is wanting more output. Even if it's just one leg of 120/240. He
> is planning to wire a circuit to an outbuilding. 120 v only is fine. He
> has overloaded the dual 3648 set up once before. I recommended another
> pair of FX3648 inverters with autoformer.
> Comments and recommendations appreciated.
> Thanks in advance
>
> Jeremy Rodriguez
> Solar Installation And Design Expert
> All Solar, Inc.
> 1463 M St
> Penrose Colorado 81240
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
> l
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list