[RE-wrenches] Increasing output Amps, Off Grid

frenergy frenergy at psln.com
Tue Feb 2 07:40:29 PST 2016


You may have to buy the OB FX's on Ebay as Outback is no longer selling 
them....I've been told.  I wish I saw that one coming.

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net

On 2/1/2016 9:09 PM, William Miller wrote:
> Jeremy:
>
> I have often wondered this question since the Trace SW days:  Since the
> Radian offers generator support, why not connect the FX inverters to the
> generator input of the Radian?  Program the Radian to expect 30 amps per
> leg.  If the load exceeds 30 amps, the Radian will kick into gen-support
> mode and aid the FX inverters.  If the load is less than 30 amps, the
> Radian goes to sleep.
>
> William
>
>
>
> Lic 773985
> millersolar.com
> 805-438-5600
>
>
> -----Original Message-----
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
> Behalf Of Jeremy Rodriguez
> Sent: Monday, February 01, 2016 7:57 PM
> To: re-wrenches at lists.re-wrenches.org
> Subject: [RE-wrenches] Increasing output Amps, Off Grid
>
> Hello
> I don't think an OB Radian can be added to an existing stacked pair of
> FX's. At least easily and have all three inverters work happily with each
> other. Can it?
>
> My client is wanting more output. Even if it's just one leg of 120/240. He
> is planning to wire a circuit to an outbuilding. 120 v only is fine. He
> has overloaded the dual 3648 set up once before.  I recommended another
> pair of FX3648 inverters with autoformer.
> Comments and recommendations appreciated.
> Thanks in advance
>
> Jeremy Rodriguez
> Solar Installation And Design Expert
> All Solar, Inc.
> 1463 M St
> Penrose Colorado 81240
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
> l
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>





More information about the RE-wrenches mailing list