[RE-wrenches] Increasing output Amps, Off Grid

[Jeremy Rodriguez]

I spoke with Outback today and I've got some options for sure, from everyone. 
Thanks!

Jeremy Rodriguez 
Solar Installation And Design Expert 
All Solar, Inc.
1463 M St
Penrose Colorado 81240

Sent by Jeremy's iPhone. Sorry for typos and shorthand!

> On Feb 2, 2016, at 8:59 AM, Jay <jay.peltz at gmail.com> wrote:
> 
> That's a very trick way to do it!
> 
> A somewhat less expensive way would be to use a 3rd VFX  on the leg you want the added power on. 
> 
> Jay
> Peltz power. 
> 
>> On Feb 1, 2016, at 9:09 PM, William Miller <william at millersolar.com> wrote:
>> 
>> Jeremy:
>> 
>> I have often wondered this question since the Trace SW days:  Since the
>> Radian offers generator support, why not connect the FX inverters to the
>> generator input of the Radian?  Program the Radian to expect 30 amps per
>> leg.  If the load exceeds 30 amps, the Radian will kick into gen-support
>> mode and aid the FX inverters.  If the load is less than 30 amps, the
>> Radian goes to sleep.
>> 
>> William
>> 
>> 
>> 
>> Lic 773985
>> millersolar.com
>> 805-438-5600
>> 
>> 
>> -----Original Message-----
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
>> Behalf Of Jeremy Rodriguez
>> Sent: Monday, February 01, 2016 7:57 PM
>> To: re-wrenches at lists.re-wrenches.org
>> Subject: [RE-wrenches] Increasing output Amps, Off Grid
>> 
>> Hello
>> I don't think an OB Radian can be added to an existing stacked pair of
>> FX's. At least easily and have all three inverters work happily with each
>> other. Can it?
>> 
>> My client is wanting more output. Even if it's just one leg of 120/240. He
>> is planning to wire a circuit to an outbuilding. 120 v only is fine. He
>> has overloaded the dual 3648 set up once before.  I recommended another
>> pair of FX3648 inverters with autoformer.
>> Comments and recommendations appreciated.
>> Thanks in advance
>> 
>> Jeremy Rodriguez
>> Solar Installation And Design Expert
>> All Solar, Inc.
>> 1463 M St
>> Penrose Colorado 81240
>> 
>> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
>> l
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>