[RE-wrenches] Outback AGM cell R&R

[Jeff Oldham]

Has anyone R&R a single cell from an Outback AGM 2 cell can? The manual speaks to being careful to not let one slide out so that is encouraging, but I'm concerned about putting it back in. Do they have any tendency to bulge and make it difficult to replace? I have an extremely tight, steep and nearly inaccessible existing battery location that is not conducive to battery relocation or any reasonable rigging to handle 200# 2) cell cans. I hope a fellow Wrench has had to deal as I cannot get any answers from the manu. Thanks and have a fun and safe holiday weekend!


>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions

____________________________________________________________
Affordable Wireless Plans
Set up is easy. Get online in minutes.
Starting at only $9.95 per month! 
www.netzero.net?refcd=nzmem0216
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160701/fe3673a1/attachment-0002.html>