[RE-wrenches] Bracket for Fronius IG

[Jason Szumlanski]

Yes, mounting bracket (top and bottom)

​It's not the easiest inverter to mount without the factory supplied
brackets, and I'm up against one that was removed and requires
re-installation.​



On Thu, Jun 30, 2016 at 10:36 AM, frenergy <frenergy at psln.com> wrote:

> do you mean a mounting bracket?  I can't remember if the mounting brackets
> are the same for all sizes of IGs
>
>
> On 6/30/2016 7:22 AM, Jason Szumlanski wrote:
>
> Anyone know where I can get a replacement bracket set for an IG5000?
>
>
> ​Jason Szumlanski
> Florida Solar Design Group
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:www.members.re-wrenches.org
>
>
>
> --
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983530.284.7849
> CA Lic 874049www.frenergy.net
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160630/060e0d02/attachment-0002.html>