[RE-wrenches] MIGB's

[AE Solar]

Wrenchers,
What are you all using as strain reliefs on the ends of conduit runs that
run between arrays on roof mounts? We have arrays on two roof sections with
a piece of rigid conduit connecting the two,  and galvanized MIGB's (ground
bushings maybe some people call them?) on each end of the pipe. It was just
cited on an inspection that this was improper use of equipment because the
galv MIGB's are not rated for outdoor use? Anyone have anything to back up
the use of this method or have a preferred method for strain relief and
bonding for this application? Thanks for any thoughts.
Adam

Adam Katzman
Autonomous Energies
PO Box 1245
Kingston, NY 12402
www.autonomousenergies.com
(518) 567-1468
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160216/15988890/attachment-0002.html>